Bridgestone 295/35 ZR20 (101Y) Potenza S 001 RFT Ferrari

The tyres will be delivered without rim. (Tread pattern varies depending on the tyre width.)

Bridgestone

295/35 ZR20 (101Y) Potenza S 001 RFT Ferrari  

(21)

summer tyres

Tyre properties:
FSL RFT TL
Manufacturer:
Bridgestone 
Profile:
Potenza S 001 RFT Ferrari
Size:
295/35 R20 101 Y TL
Speed index:
Load index:
101  
Category:
Summer tyres 
EAN:
3286340397711

Online purchase

(Purchase online and have it delivered to desired address)

(Purchase online and have it delivered to desired address)

Available 2
1962 98 kr. X
1962 98 kr.
1975.48 kr. (incl. 12.50 kr. environmental tax)

The Potenza S001 stands for pure sporting performance with superior grip and precise response. The tyre offers stability and optimum roadholding at high speeds, excellent traction and safe wet handling.




High speed performance

Wet control

Excellent grip and precision response




High grip shoulder blocks

Stiff ‘high grip’ shoulder blocks produces outstanding grip through corners. Longitudinal stiffness generates the high braking force required.



Off-center straight rib

Remarkable steering response & precision for an exciting sporty feel. Perfect high-speed stability provided by the off-centre straight rib tread.



Active insert

Increasing longitudinal stiffness for improved braking & handling performance. While maintaining vertical stiffness for cornering grip & ride comfort.



High angle lug grooves

High-angle lug grooves aid to improve drainage of excess water from the rib area into the main grooves for hydroplaning resistance.



Wide grooves design

Angle of lug grooves tuned to minimise block deformation during braking. Wide groove design provides rapid water evacuation.



Ultra high efficiency

Advanced groove & lug design surpressing excess pattern & surface noise. Light weight belt construction for reducing rolling resistance & higher fuel efficiency.



Bridgestone Approved Website

QR-Code Bridgestone 3977 295/35 R20 101 Y TL C1
A B C
2020/740
EU tire label datasheet

DatailTyre.EuReifenLabel2020740.Title

The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.

Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.

The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990.
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more


An overview of the criteria and assessment categories

Fuel Efficiency

The fuel consumption depends on the rolling resistance of the tyres, the vehicle itself, the driving conditions and the driver's driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is divided into classes A (highest efficiency) to E (lowest efficiency).

If a vehicle is fully equipped with class A tyres, a reduction in fuel consumption of up to 7.5%* is possible, compared to a vehicle equipped with class E tyres. It can be even higher for commercial vehicles.
(Source: European Commission Impact Assessment
* if measurements were carried out in accordance with the test methods specified in Regulation (EU) 2020/740)

Please note:
Fuel consumption depends to a large extent on the driver's own driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, it is important to regularly check the tyre pressure.

Wet Grip

Wet grip is divided into classes A (shortest braking distance) to E (longest braking distance).

Braking distance can be reduced by up to 18 m in the case of an emergency stop at 80 km/hr (on a road surface with average grip) when a car is equipped with class A tyres, compared to class E tyres.*
* Source: wdk Trade Association of the German Rubber Industry

Please note:
Road safety depends to a large extent on the driver's own driving style. Stopping distances must always be observed. To improve wet grip, it is important to regularly check the tyre pressure.

External Rolling Noise

The noise emissions from a tyre affect the overall volume of noise produced by the vehicle and have an impact not only on the driver's comfort but also on environmental noise pollution. On the EU tyre label, the external rolling noise is divided into 3 classes from A (lowest level of rolling noise) to C (highest level of rolling noise), measured in decibels (dB) and compared to the European noise emission limits for tyres' external rolling noise.

A
The pictogram with the classification "A" indicates that the external rolling noise of the tyre is more than 3 dB below the EU limit that applied until 2016.
B
The "B" classification means that the external rolling noise of the tyre is up to 3 dB below or equal to the EU limit that applied until 2016.
C
The "C" classification indicates that the specified limit has been exceeded.

x